Yamaha AVR-S80 Owner's Manual

To connect your Yamaha AVR-S80 to a Bluetooth device, first ensure that the Bluetooth function on your device is turned on. On the AVR-S80, navigate to the Bluetooth settings and select 'Pairing Mode'. Once in pairing mode, find and select the AVR-S80 on your device's Bluetooth list. Confirm connection if prompted.
If there is no sound from your Yamaha AVR-S80, check if the mute function is activated, ensure that the correct input source is selected, and verify if the speaker wires are properly connected. Also, make sure that the volume level is set to an audible level.
To update the firmware on your Yamaha AVR-S80, connect the receiver to the internet. Navigate to the settings menu, select 'Firmware Update', and then choose 'Update via Network'. Follow the on-screen instructions to complete the process. Ensure the device remains powered on during the update.
Yes, you can control your Yamaha AVR-S80 using the Yamaha AV Controller app, available for iOS and Android devices. Ensure your receiver is connected to the same network as your mobile device, then download and install the app from your app store.
To reset your Yamaha AVR-S80 to factory settings, turn off the receiver. Then, press and hold the 'Straight' button and power on the unit. Continue holding the 'Straight' button until 'Advanced Setup' appears. Use the 'Program' button to select 'Init All' and confirm reset.
To clean your Yamaha AVR-S80, use a soft, dry cloth to gently wipe the exterior. Avoid using any chemicals or wet cloths. Ensure the vents are free from dust by using a vacuum cleaner with a brush attachment. Regularly check for firmware updates to maintain optimal performance.
To improve sound quality, ensure the speakers are properly positioned and calibrated. Use high-quality speaker cables and adjust the equalizer settings in the AVR-S80's setup menu. Consider adding a subwoofer for enhanced bass response.
If your Yamaha AVR-S80 shuts down unexpectedly, it might be due to overheating or a short circuit. Ensure the receiver is placed in a well-ventilated area and check all speaker connections for shorts. If the issue persists, consult a professional technician.
To set up surround sound on your Yamaha AVR-S80, connect your speakers to their respective terminals. Access the setup menu, choose 'Speaker Setup', and select 'Manual Setup'. Follow the on-screen instructions to calibrate each speaker for optimal surround sound performance.
To connect your Yamaha AVR-S80 to a home network, use an Ethernet cable for a wired connection, or select 'Network Setup' in the menu for a wireless connection. Follow the prompts to enter your Wi-Fi network information. Once connected, you can stream audio and control the unit through network apps.