Yamaha AR195, SX195, AR190, SX190 2018 Owner's Manual
![Yamaha AR195, SX195, AR190, SX190 2018 manual cover](/images/cf451885fbf6842703c18e79/thumbs/thumb175x175.webp)
To winterize your Yamaha AR195/SX195, start by flushing the engine with fresh water to remove salt and debris. Then, add a fuel stabilizer to the fuel tank and run the engine to circulate it through the system. Drain any remaining water from the engine and exhaust. Finally, apply fogging oil to the engine's cylinders and store the boat in a dry, covered location.
If your Yamaha AR190 is not starting, check the battery connections to ensure they are tight and corrosion-free. Verify that the battery is fully charged. Inspect the fuel system for blockages or leaks. Check the safety lanyard switch and ensure it is properly engaged. If the problem persists, consult the user manual for further troubleshooting or contact a professional technician.
Regular maintenance for the jet pump on the Yamaha SX190 includes checking for debris and removing it from the intake grate, inspecting the impeller for damage, and ensuring the pump housing is in good condition. Lubricate moving parts as recommended in the owner’s manual and replace wear rings as needed.
To improve the fuel efficiency of your Yamaha AR195, ensure that the boat is not overloaded and that the weight is evenly distributed. Keep the hull clean and free of marine growth. Regularly maintain the engine as per the manufacturer’s recommendations, and consider using a fuel additive to keep the fuel system clean.
If your Yamaha SX195's engine overheats, immediately shut off the engine to prevent damage. Check for obstructions in the cooling water intake. Inspect the impeller and cooling system for blockages or wear. Allow the engine to cool before restarting, and consult a technician if the issue persists.
The oil on a Yamaha AR190 should be changed every 50 hours of operation or at least once per season, whichever comes first. Regular oil changes ensure optimal engine performance and longevity. Always use the oil type specified in the owner’s manual.
To flush the engine on a Yamaha SX190 after saltwater use, connect a garden hose to the flushing port. Start the engine and then turn on the water. Allow the engine to run for about 10 minutes, keeping an eye on the temperature gauge. Shut off the engine before turning off the water supply to prevent overheating.
To clean and maintain the upholstery on your Yamaha AR195, use a mild soap solution and a soft cloth to wipe down surfaces. Avoid harsh chemicals that can damage the material. Rinse thoroughly with clean water and allow to air dry. Regular cleaning prevents mildew and extends the life of the upholstery.
For off-season storage of a Yamaha SX195, clean the boat thoroughly and ensure it is completely dry. Remove any electronics and store them indoors. Use a quality boat cover to protect against dust and moisture. Store the boat in a climate-controlled environment if possible. Perform all recommended maintenance prior to storage.
To check and maintain the battery in your Yamaha AR190, regularly inspect the terminals for corrosion and clean them if necessary. Ensure the battery is fully charged and top off the electrolyte levels if using a non-sealed battery. Disconnect the battery if the boat will not be used for an extended period to prevent drainage.