Workzone UH-01 53971 User Manual

To set up the Workzone UH-01 53971 Heater, place it on a flat surface away from flammable materials. Ensure the power switch is off before plugging it into a suitable power outlet. Adjust the thermostat to the desired temperature.
Check that the heater is plugged in and the circuit breaker is not tripped. Verify the power switch is in the 'on' position. If the issue persists, consult the user manual for troubleshooting steps.
Ensure the heater is unplugged and completely cool. Use a soft, damp cloth to wipe the exterior. Avoid using abrasive cleaners. For internal cleaning, refer to the maintenance section of the user manual.
Regularly check and clean the air intake and outlet grills to prevent dust buildup. Inspect the power cord for any damage. Refer to the user manual for detailed maintenance guidance.
The heater may be overheating. Ensure it isn’t blocked and that the room is not too small for the heater's capacity. Check the thermostat setting and adjust if necessary.
It is not recommended to use an extension cord as it may lead to overheating and pose a safety risk. Plug the heater directly into a wall outlet.
Turn the thermostat dial to your desired temperature setting. The heater will cycle on and off to maintain the room temperature around this setting.
The heater includes an overheat protection feature and a tip-over switch that automatically shuts off the unit if it is tilted or knocked over.
It is generally not recommended to leave any space heater unattended or on overnight. Always follow the safety guidelines in the user manual.
Ensure the heater is unplugged and completely cool. Store it in a dry place away from dust and moisture. Avoid wrapping the cord tightly around the appliance.