Worcester Greenstar 8000 Life 30kW Product Guide
![Worcester Greenstar 8000 Life 30kW Boiler manual cover](/images/STFvJmDzCQDTRxHpruKpLQbo/thumbs/thumb175x175.webp)
To reset the boiler, press the reset button on the control panel for 3 seconds. The boiler will restart and attempt to clear any error codes.
Ensure that the gas supply is turned on and that there are no obstructions in the flue. Check for any error codes on the display and refer to the manual for specific troubleshooting steps.
Use the digital display to navigate to the temperature settings. Adjust the desired temperature using the selector knob or buttons, then confirm the setting.
Regular maintenance includes annual servicing by a qualified technician, checking the pressure gauge, and ensuring that the flue and ventilation are clear of obstructions.
Turn off the heating system and use a radiator key to open the bleed valve on each radiator. Release air until water starts to flow, then close the valve.
Unusual noises could be due to air in the system, a faulty pump, or limescale build-up. It is recommended to have a professional technician examine the system.
Error code EA indicates that the boiler is failing to ignite. Check the gas supply and reset the boiler. If the problem persists, contact a qualified engineer.
Locate the filling loop below the boiler, open the valves, and fill the system until the pressure gauge reads between 1 and 1.5 bar. Close the valves after filling.
Frequent pressure loss may indicate a leak in the system. Check all visible pipes and radiators for leaks. If leaks are found, contact a professional to repair them.
It is not necessary to turn off the boiler completely, but you can switch it to summer mode to disable central heating while still having access to hot water.