Worcester Danesmoor System 18/25 Product Guide

Worcester Danesmoor System 18/25 Boiler manual cover

Pages 2

Year 0

Language(s)

of 2

Worcester Danesmoor System 18/25 Boiler Specification

The Worcester Danesmoor System 18/25 Boiler is a high-efficiency oil-fired system boiler designed to deliver reliable heating performance for medium to large-sized homes. With its robust construction and advanced technology, it offers an efficiency rating of over 90%, making it an energy-efficient choice for homeowners.

This boiler is equipped with a compact heat exchanger, which enhances heat transfer and reduces energy waste. It has a heating output range of 18 to 25 kW, providing ample power to meet the demands of various household heating requirements. The Danesmoor System 18/25 features a sealed system, eliminating the need for a separate feed and expansion tank, thereby simplifying installation and reducing the risk of system leaks.

The boiler's control system is user-friendly, allowing for precise temperature management and improved energy efficiency. It is compatible with a range of optional controls, including smart thermostats, enabling users to optimize their heating schedules for convenience and cost savings. Built with a focus on durability, the Danesmoor System 18/25 incorporates high-quality components that ensure long-term reliability and reduced maintenance needs.

Safety features include a built-in frost thermostat and an overheat thermostat, providing additional protection against extreme temperatures. The boiler is also designed to operate quietly, contributing to a comfortable home environment. The Worcester Danesmoor System 18/25 is supported by a comprehensive warranty, underscoring the manufacturer's commitment to quality and customer satisfaction. This boiler is an ideal choice for those seeking a dependable and efficient heating solution tailored to modern living requirements.

Worcester Danesmoor System 18/25 Boiler F.A.Q.

How do I reset the Worcester Danesmoor System 18/25 boiler?

To reset the Worcester Danesmoor System 18/25 boiler, press the reset button located on the control panel. Hold it for a few seconds until the reset process initiates.

What should I do if the boiler is not firing up?

Check the fuel supply and ensure that the oil tank is not empty. Verify that the power supply is on and the thermostat is set to the desired temperature.

How often should I service the Worcester Danesmoor 18/25 boiler?

It is recommended to service the Worcester Danesmoor 18/25 boiler annually to ensure optimal performance and efficiency.

What can cause the boiler to make unusual noises?

Unusual noises may be due to trapped air in the system, a faulty pump, or debris in the heat exchanger. It's best to consult a professional for a thorough diagnosis.

How can I improve the efficiency of my Worcester Danesmoor boiler?

Regular maintenance, bleeding radiators, and ensuring the system is free from sludge can improve efficiency. Consider upgrading to a programmable thermostat for better control.

Why is my boiler leaking water?

Water leaks may be due to a faulty pressure relief valve, corrosion, or a leak in the heat exchanger. It's crucial to address leaks immediately to prevent further damage.

What should I do if the boiler pressure is too low?

To increase the boiler pressure, locate the filling loop and open the valves to allow water into the system until the pressure gauge reads the recommended level.

What are common error codes on the Worcester Danesmoor 18/25 and what do they mean?

Common error codes include 'EA' indicating ignition failure and 'E9' indicating an overheat. Refer to the user manual for a complete list of error codes and their meanings.

How can I bleed the radiators in my heating system?

Turn off the heating and use a radiator key to open the bleed valve. Allow air to escape until water starts to trickle out, then close the valve. Repeat for all radiators.

Can I install the Worcester Danesmoor boiler in a garage or outhouse?

Yes, the Worcester Danesmoor boiler can be installed in a garage or outhouse, provided it is protected from frost and the installation complies with local building regulations.