Westinghouse WWW9024M5WA User Manual
![Westinghouse WWW9024M5WA Washing Machine manual cover](/images/VhSAJOqRnXYLnzYWSvDqIiMi/thumbs/thumb175x175.webp)
To reset your Westinghouse WWW9024M5WA washing machine, unplug the unit from the power source for a few minutes, then plug it back in. This should reset the electronics.
Check the drain hose for any kinks or blockages. Ensure that the pump filter is clean and free from debris. If the problem persists, consider contacting customer support.
Ensure that the machine is level by adjusting the feet. Avoid overloading the washer and distribute laundry evenly inside the drum.
Remove the detergent drawer by pressing the release lever and pulling it out. Rinse it under warm water and use a soft brush to remove any detergent residue.
Ensure that the door is fully closed and latched. Check if the power cord is properly connected and that there is no issue with the power supply.
Select the drum clean cycle on the control panel and start the machine with an empty drum. Use a drum cleaning detergent if available.
Regularly check and clean the pump filter, inspect hoses for wear, and run a drum clean cycle monthly. Wipe the door seal to prevent mold build-up.
Use the temperature setting button on the control panel to select your desired water temperature before starting the wash cycle.
Run a drum clean cycle with a washing machine cleaner. Ensure that the door is left slightly open after use to allow air circulation.
Yes, you can pause a wash cycle by pressing the start/pause button. Wait for the door to unlock before adding or removing laundry.