Westinghouse WVE612SCP User Manual
![Westinghouse WVE612SCP Oven manual cover](/images/SZLVvylCnwDLXngxgkkLcoQx/thumbs/thumb175x175.webp)
To preheat the Westinghouse WVE612SCP Oven, turn the function dial to the desired cooking mode, set the temperature using the temperature dial, and wait for the indicator light to turn off, indicating that the oven has reached the set temperature.
Check if the oven is properly plugged in and the circuit breaker is not tripped. Ensure that the temperature and function settings are correct. If the issue persists, consult the user manual and consider contacting a professional technician.
Remove all racks and accessories. Use a soft cloth with mild detergent and warm water to clean the interior. For tough stains, a baking soda paste can be applied. Avoid using abrasive cleaners or scouring pads.
Yes, you can use aluminum foil, but avoid covering the oven floor or vents to ensure proper air circulation. It's best to use foil on baking trays to catch drips and prevent spills.
To set the timer, press the timer button, use the "+" and "-" buttons to adjust the time, and press the timer button again to start the countdown. The oven will alert you when the timer reaches zero.
The cooling fan may continue to operate after the oven is turned off to help cool down the internal components. This is normal and ensures the longevity of the oven's electronics.
Ensure the oven is off and cool. Remove the protective cover over the light, unscrew the old bulb, and replace it with a new one of the same type. Reattach the cover securely.
Ensure that the oven racks are properly positioned and not overcrowded. Preheat the oven before placing food inside and consider rotating trays halfway through the cooking process for even heat distribution.
Check for any obstructions or debris around the door seal. Ensure the hinges are not damaged. If the door still does not close properly, it may require professional adjustment or replacement of parts.
Regular cleaning should be done after each use. A more thorough inspection and cleaning should be conducted every 3-6 months. Refer to the user manual for specific maintenance tips and schedules.