Volvo XC40 Quick Guide 2018
![Volvo XC40 2018 manual cover](/images/8361e8cb64fbcff3d9253b53/thumbs/thumb175x175.webp)
To reset the service light on your 2018 Volvo XC40, turn the ignition to position I without starting the engine. Press and hold the "OK" button on the left-hand steering wheel stalk. While holding "OK," turn the ignition to position II. Wait for the information light to start flashing, then release the "OK" button.
For the 2018 Volvo XC40, it is recommended to use an SAE 0W-20 full synthetic oil that meets the ACEA A5/B5 classification. Always check the owner's manual or consult with a Volvo dealership for the most accurate information.
To connect your phone via Bluetooth, ensure Bluetooth is activated on your phone. On the XC40, go to the Sensus display, select 'Settings', then 'Communication', and choose 'Bluetooth Devices'. Tap 'Add New Device' and select your phone from the list. Confirm the pairing code on both devices.
The recommended tire pressure for a 2018 Volvo XC40 is typically 36 psi for both front and rear tires. However, it's best to check the label located on the driver’s side door jamb for the most accurate information.
To replace the wiper blades on your Volvo XC40, lift the wiper arm off the windshield. Press the small tab on the underside of the wiper blade and slide it off the arm. Align the new blade with the wiper arm and slide it on until it clicks into place.
If your XC40 is not starting, common issues might include a dead battery, faulty starter motor, or issues with the ignition system. Check the battery connections and ensure the battery is charged. If the issue persists, consider contacting a professional mechanic.
To update the navigation system, download the latest maps from the Volvo Cars Support website onto a USB drive. Insert the USB into the XC40's USB port. Follow the on-screen prompts to install the update. Make sure the car is running or in ignition mode during the update process.
It is recommended to change the cabin air filter every 15,000 to 20,000 miles, or once a year, whichever comes first. This helps maintain good air quality inside the vehicle and ensures the HVAC system functions efficiently.
If the check engine light comes on, it's important to check for any noticeable issues such as changes in performance or unusual noises. Use an OBD-II scanner to retrieve any fault codes, or take the vehicle to a certified Volvo technician for diagnosis and repair.
To adjust headlight settings, access the car's Sensus display, go to 'Settings', then 'My Car', and select 'Light Settings'. From here, you can adjust the headlight mode, such as automatic or manual, and set the sensitivity for when the lights turn on and off.