Volvo XC90 Quick Guide 2017
![Volvo XC90 2017 manual cover](/images/4f2a224e9a8ec0b1dfdb3592/thumbs/thumb175x175.webp)
To reset the service light on your Volvo XC90 2017, turn the ignition to position I. Press and hold the trip odometer reset button, then turn the ignition to position II. Continue holding the button until the indicator flashes, then release.
The recommended oil type for the Volvo XC90 2017 is SAE 0W-20. Ensure it meets the Volvo standard VCC RBS0-2AE.
To pair your phone via Bluetooth, go to the Sensus display, select 'Phone', then 'Add Phone'. Ensure Bluetooth is enabled on your device and select your car from the device list. Follow on-screen instructions to complete pairing.
The towing capacity of the Volvo XC90 2017 is up to 5,000 pounds, provided it is equipped with the proper towing package.
To update the navigation system, download the latest maps from the Volvo Cars Support website onto a USB drive. Insert the USB into your car's USB port and follow the on-screen prompts on the Sensus display to complete the update.
If your air conditioning is not cooling properly, check the refrigerant level and ensure the cabin air filter is clean. If issues persist, it may require a diagnostic check for potential compressor or electrical faults.
To replace a headlight bulb, open the hood and locate the back of the headlight assembly. Remove the cover, disconnect the electrical connector, and release the spring clip. Swap the old bulb with a new one, ensuring not to touch the glass, and reverse the process.
The recommended tire pressure for the Volvo XC90 2017 is typically 36 psi for both front and rear tires. Always check the driver’s door placard for specific information related to your model.
To enable the auto-hold function, press the 'Auto Hold' button located near the gear lever. Ensure your seatbelt is fastened and the doors are closed for the feature to activate.
If a "Transmission Service Required" message appears, it is advisable to take your vehicle to a Volvo service center for diagnosis. This message could indicate a need for fluid change or a more complex transmission issue.