Volvo V90 Quick Guide 2019 Cross Country

To reset the TPMS, first ensure that all tires are inflated to the correct pressure. Turn on the ignition without starting the engine, navigate to the car settings menu on the center display, select 'My Car', then 'TPMS', and finally 'Calibrate'. Follow the on-screen instructions to complete the process.
For optimal performance, use a fully synthetic oil with a viscosity of 0W-20 that meets the Volvo VCC RBS0-2AE specification. Always check the owner's manual or consult with a Volvo dealer for the most accurate information.
To pair your smartphone, ensure Bluetooth is enabled on both the phone and the car. On the car's center display, go to 'Settings', then 'Communication', and select 'Bluetooth Devices'. Choose 'Add Device' and follow the instructions to complete pairing.
Volvo recommends servicing your V90 Cross Country every 10,000 miles or 12 months, whichever comes first. This includes oil changes, tire rotations, brake inspections, and checking fluid levels. Refer to your owner's manual for a detailed maintenance schedule.
To update the maps, connect your car to a Wi-Fi network. Go to the 'Settings' menu on the center display, select 'Navigation', then 'Map Update', and follow the prompts to download and install the latest maps.
If the car does not start, check for loose or corroded battery terminals, ensure the key fob battery is charged, and verify that the transmission is in 'Park' or 'Neutral'. If the issue persists, consult a Volvo technician to diagnose possible starter or ignition system issues.
To temporarily disable the start/stop function, press the 'Start/Stop' button located on the center console. Note that the system will reactivate the next time the engine is started unless permanently disabled by a dealer.
If the check engine light illuminates, ensure the gas cap is secure. If the light remains on, schedule a diagnostic check with a Volvo service center to identify and resolve any underlying issues.
To replace a headlight bulb, open the hood and locate the back of the headlight assembly. Remove the protective cover, disconnect the wiring harness, and replace the old bulb with a new one. Reattach the harness and cover. Refer to the owner's manual for specific instructions and bulb type.
To improve fuel efficiency, maintain proper tire pressure, use recommended motor oil, reduce excess weight in the vehicle, and drive smoothly by avoiding rapid acceleration and braking. Regular maintenance also helps optimize fuel economy.