Volvo V90 Quick Guide 2018 Cross Country

To reset the service light, turn the ignition to position I, press and hold the OK button on the steering wheel while turning the ignition to position II. Continue holding until the info light blinks.
The recommended oil type for the 2018 Volvo V90 Cross Country is SAE 0W-20, fully synthetic engine oil. Always check your owner's manual for specific recommendations.
To pair your smartphone, activate Bluetooth on your phone, go to the Sensus Connect menu in your vehicle, select 'My Car', then 'Bluetooth Devices', and follow the prompts to pair your device.
The towing capacity of the 2018 Volvo V90 Cross Country is up to 3,500 pounds, depending on the specific model and equipment. Always consult your owner's manual for exact specifications.
To update the navigation system, visit the Volvo Cars Support website, download the latest map update onto a USB, and then insert the USB into your vehicle to install the update.
If the engine overheats, pull over safely, turn off the engine, and let it cool. Check coolant levels once cooled, and seek professional assistance if necessary. Do not drive the vehicle while it's overheating.
To replace a headlight bulb, open the hood, locate the back of the headlight assembly, twist the bulb holder counterclockwise to remove, replace the bulb, and reassemble. Refer to the owner's manual for specifics.
Improving fuel efficiency can be achieved by maintaining correct tire pressure, avoiding excessive idling, using cruise control on highways, and keeping up with regular maintenance like oil changes and air filter replacements.
The recommended tire pressure for the 2018 Volvo V90 Cross Country is typically around 36 psi for both front and rear tires, but always check the sticker on the driver's side door jamb for the most accurate information.
To enable or disable the start/stop function, press the start/stop button located on the center console. The system status will be displayed on the driver's information panel.