Volvo V90 Quick Guide 2018
![Volvo V90 2018 manual cover](/images/939a6dbe920f17d21e21ced7/thumbs/thumb175x175.webp)
To connect your smartphone, enable Bluetooth on your device, go to the Sensus Connect menu on your V90's infotainment screen, select 'Phone,' then 'Add Phone.' Follow the on-screen prompts to pair your device.
The recommended maintenance schedule includes oil and filter changes every 10,000 miles or 12 months, tire rotations every 7,500 miles, and various inspections at designated intervals. Consult your owner's manual for full details.
To reset the service light, turn the ignition to position I, press and hold the trip reset button, and turn the ignition to position II. Keep holding the button until the service light starts to blink. Release the button and turn off the ignition.
Volvo recommends using SAE 0W-20 synthetic engine oil that meets the ACEA A5/B5 specification. Always check your owner's manual for the most accurate information.
To update the navigation system, download the latest maps from the Volvo Cars Support website onto a USB drive. Insert the USB drive into the car's USB port and follow the on-screen instructions to update the maps.
If keyless entry is not working, check the key fob battery and replace it if necessary. Ensure the car's battery is not depleted and verify that there are no electronic devices causing interference nearby.
To improve fuel efficiency, ensure regular maintenance, keep tires properly inflated, use cruise control on highways, and remove excess weight from the vehicle. Avoid aggressive driving and excessive idling.
Locate the spare tire and jack in the trunk. Position the jack under the jacking point closest to the flat tire, raise the car, remove the lug nuts, replace the tire with the spare, tighten the lug nuts, and lower the car. Check the spare tire pressure.
To activate parking assist, press the 'Park Assist' button on the center console. The system will detect available parking spaces and guide you with on-screen instructions and alerts.
If the battery dies, use jumper cables to connect your battery to a working vehicle's battery, ensuring the correct polarity. Start the working vehicle, then your V90. Once started, remove the cables in reverse order. Consider visiting a service center for a battery check.