Volvo V40 Quick Guide 2019 Cross Country
![Volvo V40 2019 Cross Country manual cover](/images/846473d03679382ca31584b2/thumbs/thumb175x175.webp)
To connect your smartphone, enable Bluetooth on your device and navigate to the 'Phone' option on the vehicle's Sensus Connect system. Select 'Add Phone' and choose your device from the list. Confirm the pairing code that appears on both screens.
The recommended tire pressure is typically found on a sticker located on the driver's side door frame. For most models, it is around 32 psi for front tires and 31 psi for rear tires, but always refer to the specific sticker for accurate information.
Turn the ignition to position I. Press and hold the trip reset button. Turn the ignition to position II while holding the button. Wait for the service reminder light to start flashing, then release the button.
Volvo recommends using SAE 0W-20 synthetic oil for optimal performance and efficiency in the V40 2019 Cross Country model. Always verify with the owner's manual for any updates or specific recommendations.
Open the hood and locate the back of the headlight assembly. Remove the cover and disconnect the electrical connector. Twist the bulb holder counterclockwise and remove the old bulb. Insert the new bulb, ensuring not to touch the glass, and reverse the steps to reassemble.
To replace the key fob battery, gently pry apart the key fob halves using a small flat tool. Remove the old CR2032 battery and insert a new one with the positive side facing up. Snap the key fob halves back together.
To engage the electronic parking brake, pull up on the parking brake switch located on the center console. The brake symbol will illuminate on the instrument panel to confirm it is engaged.
The Volvo V40 2019 Cross Country typically has a sealed transmission system, so checking the fluid is not required under normal conditions. For concerns, consult an authorized Volvo service center.
To update the navigation system, download the latest maps from the Volvo Cars website onto a USB drive. Insert the USB into the car's port and follow the on-screen instructions to complete the update.
To activate cruise control, press the 'Cruise' button on the steering wheel. Accelerate to the desired speed and press the 'Set' button to maintain that speed. Adjust with the '+' or '-' buttons to change speed settings.