Volvo V40 Quick Guide 2017

To reset the service light, turn the ignition to position I. Press and hold the trip odometer reset button. Turn the ignition to position II without starting the engine. Keep holding the button until the service light starts flashing. Release the button, and the light should reset.
The recommended engine oil for a Volvo V40 2017 is a synthetic 0W-30 or 5W-30 oil that meets the ACEA A5/B5 specification. Always check the owner's manual for specific oil recommendations.
To pair your phone, enable Bluetooth on your phone and make it discoverable. On the car's infotainment system, navigate to 'Settings', then 'Bluetooth', and select 'Add Device'. Follow the on-screen prompts to complete the pairing process.
Ensure the vehicle is on a flat surface and apply the parking brake. Loosen the lug nuts slightly before jacking up the car. Use the jack to lift the car, remove the lug nuts, and replace the flat tire with the spare. Tighten the lug nuts in a crisscross pattern. Lower the vehicle and fully tighten the nuts.
Activate the parking assist by pressing the parking assist button located near the gear shifter. The system uses sensors to assist with parking and will alert you to obstacles while parking.
First, check the battery of your key fob and replace it if necessary. If the problem persists, try resetting the system by locking and unlocking the car with the physical key. If the issue continues, consult a Volvo technician.
The air filter should typically be replaced every 15,000 to 30,000 miles, depending on driving conditions. Always refer to the owner's manual for specific maintenance schedules.
The recommended tire pressure for a Volvo V40 2017 is usually around 32 psi for the front and rear tires. However, check the sticker on the driver's side door jamb for the exact specifications.
To update the navigation system, download the latest map updates from the Volvo website onto a USB drive. Insert the USB drive into the car's USB port and follow the on-screen instructions to complete the update process.
If the engine warning light comes on, check for any obvious issues such as a loose fuel cap. If nothing is apparent, have the vehicle checked by a qualified technician as soon as possible to diagnose and rectify the issue.