Volvo V40 Owners Manual 2014

To reset the service light on your Volvo V40 2014, turn the ignition to position I. Press and hold the trip reset button. Turn the ignition to position II while holding the button. Wait for the service light to flash, then release the button.

It is recommended to use a fully synthetic 0W-30 or 5W-30 engine oil that meets ACEA A5/B5 specifications for the Volvo V40 2014.

A "Low Battery" warning may indicate that the battery voltage is low, often due to infrequent use or short trips. Consider charging the battery fully or replacing it if the problem persists.

To check the brake fluid level, locate the brake fluid reservoir under the hood. Ensure the car is on a level surface and check that the fluid is between the "MIN" and "MAX" marks on the reservoir.

To replace the cabin air filter, locate it behind the glove compartment. Remove the retaining clips or screws, take out the old filter, and insert the new one, ensuring it is aligned correctly.

If the air conditioning is not cooling properly, check for a refrigerant leak, a clogged cabin air filter, or a malfunctioning compressor. It may require professional diagnosis and repair.

To pair your phone, activate Bluetooth on your device. On the car's infotainment screen, navigate to "Phone" -> "Add Phone" and select your device from the list. Confirm the pairing code on both devices.

If the "Check Engine" light comes on, check for any obvious issues such as a loose fuel cap. If the light remains on, have the vehicle diagnosed by a professional to identify any underlying problems.

It is recommended to change the engine oil every 10,000 miles or 12 months, whichever comes first, to ensure optimal engine performance and longevity.

For the Volvo V40 2014, the recommended tire pressure is usually around 32 PSI for both front and rear tires, but always refer to the placard on the driver's door frame for exact specifications.