Volvo S60 Quick Guide 2020
![Volvo S60 2020 manual cover](/images/04e9cad1ffbd29df0abee454/thumbs/thumb175x175.webp)
To perform a factory reset on the Volvo S60 2020 infotainment system, navigate to Settings > System > Factory Reset, and confirm your selection. Ensure you back up any important data before resetting.
The recommended tire pressure for the Volvo S60 2020 is typically 35 psi for both front and rear tires. However, always refer to the sticker on the driver’s door jamb for the most accurate information.
To connect your phone via Bluetooth, go to the infotainment system's Bluetooth menu, ensure your phone's Bluetooth is enabled, and select 'Pair New Device'. Follow the on-screen prompts to complete the pairing process.
To change a flat tire, first ensure the car is on a flat surface and apply the parking brake. Locate the spare tire and tools, lift the car with the jack, remove the lug nuts, replace the tire, and tighten the lug nuts in a star pattern.
To update the navigation system, connect your vehicle to a reliable Wi-Fi network, go to the Settings menu, select Navigation, and choose 'Check for Updates'. Follow the instructions to download and install the updates.
The oil in the Volvo S60 2020 should be changed every 10,000 miles or 12 months, whichever comes first. Always use the recommended oil type specified in the owner’s manual.
If the check engine light illuminates, check for any obvious issues like a loose gas cap. If the light remains on, schedule a diagnostic check with a Volvo service center to identify and address the problem.
To improve fuel efficiency, ensure regular maintenance, keep tires properly inflated, use recommended fuel, avoid excessive idling, and drive at moderate speeds. Regularly check for and address any issues.
To replace the cabin air filter, open the glove box, detach the dampener arm, and access the filter housing. Remove the old filter and insert the new one, ensuring the airflow direction is correct. Reassemble the components.
To jump-start the Volvo S60 2020, connect the positive cable to the positive terminal of the dead battery, then to the positive terminal of the donor battery. Connect the negative cable to the donor battery's negative terminal and then to a metal ground on the dead car. Start the donor vehicle, then the S60.