Volvo S60 Quick Guide 2017 Cross Country
![Volvo S60 2017 Cross Country manual cover](/images/dc69c38ea00cf6c385284ae3/thumbs/thumb175x175.webp)
To reset the service light, turn the ignition to position I, press and hold the trip reset button on the odometer, and turn the ignition to position II. Keep holding the button until the information light blinks, then release it.
The recommended engine oil for the 2017 Volvo S60 Cross Country is SAE 0W-20, meeting the Volvo specification VCC RBS0-2AE.
Updates for the navigation system can be downloaded from the Volvo Cars website and installed using a USB drive. Insert the USB into the port in your car and follow the on-screen instructions for the update.
The recommended tire pressure for the Volvo S60 Cross Country is typically 36 psi for the front tires and 35 psi for the rear tires. Always check the tire placard on the driver's side door frame for the most accurate information.
To pair your phone, turn on Bluetooth on your device, navigate to the 'Phone' menu on the car's infotainment system, and select 'Add Phone'. Follow the prompts to pair your device.
If the key fob battery is dead, use the emergency key blade to unlock the driver's door. To start the car, place the key fob in the key fob holder located under the center console's armrest.
Brake pads should generally be replaced every 30,000 to 70,000 miles, but this can vary based on driving conditions and habits. Regularly inspect the brake pads for wear and consult your service manual for specific guidance.
The towing capacity of the 2017 Volvo S60 Cross Country is approximately 3,500 pounds, but it's important to check your owner's manual for specific towing guidelines and recommendations.
To replace a headlight bulb, open the hood and locate the back of the headlight assembly. Remove the cover, disconnect the wiring harness, and replace the bulb. Reattach the harness and cover. Always handle new bulbs with gloves to avoid oil contamination.
If the air conditioning is not working, check the A/C fuse, refrigerant level, and ensure the compressor is engaging. If these components appear normal, it may be necessary to consult a professional technician for further diagnosis.