Volvo S60 Quick Guide 2016 Cross Country

To reset the service light, turn the ignition to position I. Press and hold the trip odometer reset button. Turn the ignition to position II while holding the button. After a few seconds, the service light will start blinking. Release the button once the light stops blinking.
It is recommended to use SAE 0W-30 or 5W-30 engine oil that meets the ACEA A5/B5 specification for optimal performance. Always check your owner's manual for specific recommendations.
To connect your phone via Bluetooth, ensure Bluetooth is enabled on your phone. On the car’s display, go to 'My Car' > 'Settings' > 'Bluetooth'. Select 'Add Phone' and choose your phone from the list. Confirm the pairing code on both devices to complete the connection.
If the tire pressure warning light illuminates, check the pressure of all tires using a reliable pressure gauge. Inflate any tires that are below the recommended pressure, which can be found on the driver's door placard. If the light remains on, have the system checked by a professional.
To replace the wiper blades, lift the wiper arm away from the windshield. Press the release tab on the wiper blade and slide it off the arm. Align the new blade with the arm and slide it until it clicks into place. Lower the wiper arm back onto the windshield.
If your car won't start despite having a new battery, check the battery connections for corrosion or looseness. Ensure that the starter and alternator are functioning correctly. If the issue persists, have a professional diagnose the problem as it could be related to the ignition system or fuel supply.
To update the navigation system, download the latest map updates from the Volvo Cars website onto a USB drive. Insert the USB drive into the car’s USB port. Follow the on-screen instructions to complete the update process. Ensure the car is running or in ignition mode II during the update.
The towing capacity of the Volvo S60 2016 Cross Country is approximately 3,500 pounds (1,588 kg) when equipped with the appropriate towing package. Always refer to the owner’s manual for specific towing guidelines and ensure the load is distributed evenly.
To check the transmission fluid level, ensure the vehicle is on a level surface and the engine is warm. Locate the transmission dipstick, remove it, and wipe it clean. Reinsert it fully, then remove it again to check the fluid level. The fluid should be between the 'Min' and 'Max' marks.
If your vehicle overheats, turn off the air conditioning and turn on the heater to full heat to help dissipate heat from the engine. Pull over safely, turn off the engine, and allow it to cool. Check coolant levels and look for leaks. If necessary, add coolant once the engine is cool. If the problem persists, seek professional assistance.