Visage GT-MP-03-us 94992 User Manual
![Visage GT-MP-03-us 94992 manual cover](/images/AQepDGJhbRaDPqCixAJWHvrv/thumbs/thumb175x175.webp)
To change the attachments, ensure the device is turned off and unplugged. Gently twist and pull the current attachment to remove it. Align the new attachment with the connector and push until it clicks into place securely.
Detach the attachments from the device and rinse them under warm water. Use a soft brush to remove any residue. Dry thoroughly before reattaching or storing them. Avoid using harsh chemicals.
Check if the device is properly plugged in and that the power outlet is functioning. Ensure that the power switch is in the "on" position. If the problem persists, inspect the cord for damage or consider contacting customer support.
Yes, the device can be used on acrylic nails. However, use the appropriate attachment and setting to avoid excessive pressure that might damage the acrylic.
The frequency of replacement depends on usage. Regular users should inspect attachments monthly for wear and replace them if they show signs of deterioration or reduced performance.
Immediately turn off and unplug the device. Allow it to cool down completely before resuming use. Check for blockages or excessive pressure that might cause overheating.
No, the main unit is not waterproof. Only the detachable attachments can be rinsed with water. Ensure the device remains dry to prevent damage.
Start with a low speed setting to avoid damaging the nail surface. Gradually increase the speed if necessary, based on the nail condition and personal comfort.
After cleaning, place the attachments in their designated slots within the storage case. Ensure the device is unplugged and the cord is neatly coiled. Store in a cool, dry place away from direct sunlight.
It is not recommended to use the device on infected nails. Consult a healthcare professional for treatment before resuming use to prevent spreading the infection.