Viking RWDW324 Quick Reference Guide
![Viking RWDW324 Dishwasher manual cover](/images/hMhoiZMrgnsiOjyOenUszWMj/thumbs/thumb175x175.webp)
To reset the Viking RWDW324 dishwasher, press and hold the 'Start' button for 3 seconds. The dishwasher should beep and the control panel lights will reset.
Check for clogs in the drain hose and ensure the garbage disposal is clear. Also, inspect the filter for debris and clean it if necessary.
To clean the filter, remove the bottom rack, twist the filter counterclockwise, and lift it out. Rinse it under running water and use a soft brush if needed. Reinstall by placing it back and twisting clockwise.
Unusual noises can be caused by items in the dishwasher rattling against each other. Make sure dishes are properly loaded and not touching. Check for foreign objects in the pump area.
For heavily soiled dishes, use the 'Heavy Duty' cycle. This cycle uses higher temperatures and more water for better cleaning results.
Ensure the door is fully closed and latched. Check the circuit breaker and power supply. Verify that the control panel is not locked by pressing and holding the 'Lock' button for 3 seconds.
It's recommended to clean the spray arms every 1-3 months. Remove them by unscrewing the retaining nut, then rinse and clear any blockages from the holes with a toothpick.
Check the door seal for damage or debris. Ensure the dishwasher is level and inspect hoses and connections for leaks. Replace any worn gaskets or seals if necessary.
No, regular dish soap can cause excessive suds and lead to leaks. Always use detergent specifically designed for dishwashers.
To improve drying performance, ensure rinse aid is filled, select the 'Heated Dry' option, and open the door slightly after the cycle to let steam escape.