Viking RVEWD330 Quick Reference Guide
![Viking RVEWD330 Drawer manual cover](/images/fQRGMMSGnqWUXUKbgNAMcEMo/thumbs/thumb175x175.webp)
To install the Viking RVEWD330 Drawer, follow the installation instructions in the user manual. Ensure the drawer is properly aligned with the cabinetry and securely fastened. Check power connections and test the drawer for proper operation.
If the drawer does not heat up, check the power connection and ensure it is plugged in properly. Verify that the circuit breaker is not tripped. If there is still an issue, consult the user manual for troubleshooting steps or contact Viking customer support.
To clean the drawer, use a soft cloth and mild detergent. Avoid using abrasive cleaners or scouring pads. Ensure the drawer is cool before cleaning and wipe dry after cleaning to prevent water spots.
Yes, the Viking RVEWD330 Drawer can be used for proofing dough. Set the drawer to the proofing temperature and place the dough inside, covering it with a damp cloth to prevent drying out.
Regularly clean the exterior and interior of the drawer. Check the seals for any wear and replace if necessary. Ensure the vents are not blocked and perform routine checks on the heating element for any signs of damage.
To adjust the temperature settings, refer to the control panel on the drawer. Use the temperature control buttons to set the desired temperature according to the user manual instructions.
Unusual noises may indicate a loose component or obstruction. Inspect the drawer for any visible issues and tighten any loose parts. If the noise persists, contact a professional technician for further inspection.
It is not recommended to place heavy items on top of the drawer as it may affect performance or cause damage. Light items that do not obstruct ventilation are generally acceptable.
Ensure the drawer is not overloaded and that heat is able to circulate freely. Regularly clean and maintain the unit, and avoid frequent opening which can cause heat loss.
Check the power supply and ensure the drawer is properly connected. If the lights still do not work, inspect for any blown fuses or contact Viking support for assistance.