Vax VRS17W User's Guide
![Vax VRS17W manual cover](/images/3e98957206e806366adfc288/thumbs/thumb175x175.webp)
To assemble the Vax VRS17W, start by attaching the handle to the main body until it clicks into place. Then, attach the hose to the front of the vacuum and connect the extension wand if needed. Finally, secure the floor head to the wand.
To clean the filters, first, remove them from the vacuum. Rinse the filters under lukewarm water until the water runs clear. Allow them to air dry completely before reinserting. Regular cleaning ensures optimal performance.
If experiencing loss of suction, check for blockages in the hose or attachments, clean or replace dirty filters, and ensure the dust container is not full. These steps should restore suction.
Empty the dust container after every use or when it reaches the 'max' fill line. Regular emptying prevents loss of suction and maintains efficiency.
The brush bar may not rotate due to tangled hair or debris. Turn off the vacuum, unplug it, and remove any obstructions from the brush bar. Also, check the belt for damage.
Regularly clean the filters, check for and remove blockages, and inspect parts like the belt and brush bar. Store the vacuum in a dry place to prevent damage.
The Vax VRS17W typically includes a crevice tool, dusting brush, and upholstery tool. The crevice tool is for tight spaces, the dusting brush for delicate surfaces, and the upholstery tool for furniture cleaning.
Yes, the Vax VRS17W can be used on hardwood floors. Ensure the brush bar is turned off to avoid scratching. Use the appropriate floor setting and attachments for the best results.
To replace the belt, unplug the vacuum and remove the brush bar cover. Take out the old belt and fit a new one around the brush bar and motor shaft. Reassemble the vacuum.
If the vacuum overheats, turn it off and unplug it. Check for blockages and clean the filters. Allow it to cool for at least 30 minutes before resuming use.