Vax U91-MA-R, U90-MA, U91-MA Series User's Guide
![Vax U91-MA-R, U90-MA, U91-MA Series manual cover](/images/0c4c0d237e9393dc5f7e28a1/thumbs/thumb175x175.webp)
To change the filters, first ensure the vacuum is unplugged. Locate the filter compartment, remove the old filter, and replace it with a new one. Refer to the user manual for specific instructions related to your model.
Check for blockages in the hose, dustbin, and filters. Clean or replace filters if necessary. Ensure the dustbin is not full and is properly attached.
Yes, the Vax U91-MA series is suitable for use on hardwood floors. Ensure the brush bar is set to the appropriate setting to avoid scratching.
It is recommended to clean the dustbin after every use to maintain optimal performance and hygiene.
The brush bar may stop spinning due to blockages or debris. Clear any obstructions and check if the belt is intact. Replace the belt if it's broken.
To maintain battery life, ensure the battery is fully charged before use. Avoid leaving it on charge continuously and store in a cool, dry place when not in use.
Remove the filters and tap them gently to remove loose dust. Rinse under lukewarm water without soap, and let them air dry completely before reinserting.
A burning smell can indicate a blockage or a worn-out belt. Check for obstructions and inspect the belt for signs of wear. Replace as necessary.
Ensure the power cord is securely plugged in and check the fuse in the plug. If using a cordless model, check the battery charge level.
Yes, the dustbin can be washed. Remove it from the vacuum, empty the contents, and rinse with water. Ensure it is completely dry before reattaching.