Vax H90-GA-B User's Guide
![Vax H90-GA-B manual cover](/images/52204d6ead9ef769a712ca0d/thumbs/thumb175x175.webp)
To assemble the Vax H90-GA-B, attach the handle to the main body by aligning the notches and securing it with the provided screws. Ensure that all parts click into place firmly. Refer to the user manual for detailed instructions.
If the vacuum loses suction, check for blockages in the hose and filters. Clean or replace the filters if necessary. Ensure that the dust container is not full and is properly attached.
Remove the filter from the vacuum. Rinse it under lukewarm water until the water runs clear. Allow the filter to dry completely before reinserting it into the vacuum. Do not use detergents.
Store the Vax H90-GA-B in a cool, dry place. Ensure the power cord is neatly wound and that the vacuum is placed upright to prevent any damage.
It is recommended to replace the filters every 3 to 6 months, depending on usage. Regular maintenance ensures optimal performance and longevity of the vacuum.
Check if the vacuum is properly plugged into a working power outlet. Inspect the power cord for any signs of damage. If the vacuum still does not turn on, consult a professional technician.
Yes, the Vax H90-GA-B is suitable for use on hardwood floors. Ensure that the brush settings are adjusted appropriately to avoid scratching the surface.
To empty the dust container, detach it from the vacuum, open the lid, and dispose of the contents in a trash bin. Reattach the container securely before using the vacuum again.
The Vax H90-GA-B typically includes a crevice tool and an upholstery brush. The crevice tool is ideal for tight spaces, while the upholstery brush is designed for furniture fabrics. Attach them to the hose as needed.
To extend battery life, fully charge the vacuum before first use and avoid overcharging. Store the vacuum in a cool, dry place and perform regular battery maintenance as recommended in the user manual.