Vax H87-G12, H87-GM15 Series User's Guide

To clean the filters, first ensure the vacuum is turned off and unplugged. Remove the filter from the unit, then gently tap it to remove any loose dust. Rinse the filter under lukewarm water until the water runs clear. Allow it to air dry completely before reinserting.
Loss of suction can be due to a clogged filter, full dust container, or blockages in the hose. Check and clean the filter, empty the dust container, and inspect the hose for blockages.
Yes, the Vax H87-G12 is suitable for use on hardwood floors. Ensure the vacuum is set to the appropriate floor setting to avoid scratching.
The filter should be replaced every 6-12 months, depending on usage. If the vacuum is used frequently or in particularly dusty environments, consider replacing it closer to the 6-month mark.
If the vacuum is overheating, turn it off and unplug it immediately. Check for blockages in the hose and filters, and ensure the dust container is not full. Allow the vacuum to cool down before restarting.
Ensure the vacuum is plugged in securely. Check the power outlet with another device to confirm it is working. If the vacuum still doesn't turn on, inspect the power cord for damage. Consider contacting customer support if the issue persists.
Regularly clean and replace filters, empty the dust container after each use, and check for blockages in hoses and attachments. Store the vacuum in a cool, dry place to prevent moisture damage.
The Vax H87-GM15 typically includes a crevice tool for tight spaces, a dusting brush for delicate surfaces, and an upholstery tool for furniture. Check the user manual for a complete list of attachments and their recommended uses.
To store your vacuum, wrap the cord neatly and place the vacuum upright in a dry, cool space. Avoid storing in areas with extreme temperatures or humidity.
Unusual noise can be caused by blockages, worn-out filters, or damaged parts. Check for obstructions in the hose and attachments, clean or replace the filter, and inspect the vacuum for any loose or damaged components.