Vax CDHF-SGXS, S85-CM User's Guide
![Vax CDHF-SGXS, S85-CM manual cover](/images/79f3eea6e036de937b1de53f/thumbs/thumb175x175.webp)
To assemble the Vax CDHF-SGXS vacuum cleaner, first attach the handle to the main body until it clicks into place. Insert the hose into the designated port and secure the attachments as needed. Ensure all connections are tight before use.
If the Vax S85-CM loses suction, check for blockages in the hose and filters. Clean or replace the filters if they are dirty. Ensure the dust container is not full and is properly attached.
It is recommended to clean the filters of your Vax CDHF-SGXS every 3 months. Rinse them under warm water and let them dry completely before reattaching.
To store the Vax S85-CM, wrap the power cord neatly around the hooks provided. Store the vacuum in a cool, dry place and ensure all attachments are securely placed to avoid damage.
If the brush bar on the Vax CDHF-SGXS is not spinning, check for obstructions or tangled hair. Clean the brush bar and ensure it is properly seated. Verify if the brush bar switch is turned on.
Yes, the Vax S85-CM is suitable for use on hardwood floors. Make sure to adjust the settings for hard floors to prevent scratching.
To maintain the battery life of your Vax CDHF-SGXS, fully charge the battery before first use and avoid leaving it plugged in after it has reached full charge. Store the vacuum in a moderate temperature environment.
If your Vax S85-CM starts overheating, turn it off and unplug it immediately. Check for blockages and clean the filters. Let it cool down completely before using it again.
To replace the belt on your Vax CDHF-SGXS, first ensure the vacuum is unplugged. Remove the base plate, take out the old belt, and loop the new belt around the motor shaft and brush bar. Reattach the base plate securely.
To clean the dust container of your Vax S85-CM, detach it from the main body, empty the contents into a trash bin, and rinse it with warm water. Allow it to dry completely before reattaching.