Tyco RC Racers 33067 Manual
![Tyco Mattel RC Racers 33067 Toy manual cover](/images/CSdeUzZbMzVmsmMUltIYyOhP/thumbs/thumb175x175.webp)
To pair the remote with the Tyco Mattel RC Racers 33067, ensure the car and remote are both turned off. Turn on the car first, then the remote. The pairing should occur automatically.
Check the batteries in both the car and remote control, ensuring they are fully charged or new. Also, make sure there are no obstructions or interference in the signal path.
To change the batteries, locate the battery compartment on the bottom of the car and on the back of the remote. Use a screwdriver to open the compartments, replace the old batteries with new ones, and securely close the compartments.
Use a soft, damp cloth to wipe down the exterior of the car. Avoid using harsh chemicals. Regularly check the wheels for debris and ensure that the battery contacts are clean.
To improve performance, keep the tires clean and free of dirt, ensure the battery is fully charged, and avoid overloading the car with additional weight.
The car might be moving slower due to low battery power or dirty wheels. Try charging or replacing the batteries and cleaning the wheels to restore speed.
The Tyco Mattel RC Racers 33067 is not designed for use in water. Operating it in water can damage the electronic components.
Check for any debris or obstructions in the wheels or gears. If the noise persists, inspect the motor and gears for wear or damage.
Charging time can vary, but it typically takes about 4 to 6 hours to fully charge the Tyco Mattel RC Racers 33067 battery.
The operating range of the remote control is approximately 30 meters, depending on environmental factors and battery strength.