Toro Z Master Z255 74228 Operator's Manual

Regular maintenance includes checking and replacing the oil, inspecting and replacing the air filter, sharpening the blades, checking tire pressure, and lubricating all moving parts. Refer to the owner's manual for detailed instructions.
Check the fuel level, ensure the battery is charged, inspect the spark plug for damage or wear, and verify that all safety switches are engaged. If the problem persists, consult a professional technician.
Ensure the mower deck is level, check the blades for sharpness and balance, and inspect the tire pressure. Adjust the deck height settings if necessary.
Toro recommends using SAE 30 or 10W-30 motor oil for optimal performance. Check the owner's manual for specific recommendations based on your operating environment.
Ensure the mower is turned off and the ignition key is removed. Raise the deck, remove the blade bolts, and replace the blades. Make sure to tighten the bolts securely. Refer to the manual for detailed safety instructions.
Check for debris caught in the blades, inspect the blades for damage or imbalance, and verify that all bolts and screws are tightened properly. Excessive vibration may require professional servicing.
The air filter should be checked before each mowing session and replaced every 100 hours of operation or once per season, whichever comes first.
The recommended tire pressure for the Toro Z Master Z255 is typically 13 psi for the front tires and 10 psi for the rear tires. Always check the tire sidewall for specific recommendations.
Use the deck lift lever to adjust the cutting height. The mower offers multiple height settings, allowing you to choose the optimal height for your lawn conditions.
Check the PTO switch to ensure it is turned on, inspect the drive belt for wear or damage, and verify the connections of the safety interlock system. If the issue persists, consult a service technician.