Toro Wheel Horse Recycler 70142 Operator's Manual
![Toro Wheel Horse Recycler 70142 Mower manual cover](/images/tMSQdiLRrFRGNOAREqoZHUub/thumbs/thumb175x175.webp)
To start the Toro Wheel Horse Recycler 70142 Mower, ensure the fuel valve is open, set the throttle to 'fast', engage the choke if the engine is cold, and then turn the ignition key to start the engine.
Use SAE 30 oil when operating in temperatures above 32°F (0°C) and SAE 5W-30 for temperatures below that. Regularly check the oil level and change as needed.
Blades should be sharpened at least once per mowing season or after every 25 hours of use. Dull blades can damage grass and strain the engine.
If the mower won't start, check the fuel level, ensure the spark plug is connected, verify that the air filter is clean, and inspect the battery charge.
To clean the deck, ensure the mower is off and cool, then use a garden hose to spray off grass clippings and debris. A scraper may be used for stubborn build-ups.
The recommended tire pressure is typically around 15 PSI for the front tires and 10 PSI for the rear tires, but refer to your manual for specific guidance.
To replace the spark plug, disconnect the spark plug wire, use a spark plug wrench to remove the old plug, insert the new spark plug, and reconnect the wire.
At the end of the mowing season, change the oil, clean the air filter, sharpen the blades, and stabilize the fuel or drain the tank to prevent gum deposits.
To adjust the cutting height, locate the height adjustment levers on each wheel and move them to the desired position, ensuring all wheels are set equally.
Excessive vibration may be due to an unbalanced blade or debris lodged in the deck. Check and clean the deck, and inspect the blade for balance or damage.