Toro Wheel Horse 71190 Operator's Manual
![Toro Wheel Horse 71190 Tractor manual cover](/images/RhqyNulXITuNnInhfYXoCyOi/thumbs/thumb175x175.webp)
To start the Toro Wheel Horse 71190 Tractor, ensure it is in neutral, depress the clutch pedal, and turn the ignition key to the start position. Release the key once the engine starts.
The Toro Wheel Horse 71190 typically requires SAE 30 motor oil for optimal performance. Always check the owner's manual for specific recommendations.
Regular maintenance should be performed every 25 hours of operation, including oil changes, air filter checks, and spark plug inspections. Refer to the maintenance schedule in the owner's manual for detailed guidance.
If the tractor won't start, check the battery connections, ensure there is fuel in the tank, and inspect the spark plug for wear or damage. Additionally, verify that the safety switches are engaged.
To change the blades, lower the mower deck, remove the blade bolts with a wrench, and replace the old blades with new ones. Ensure the blades are installed with the cutting edge facing the correct direction. Tighten the bolts securely.
The recommended tire pressure is typically around 12-15 PSI for the front tires and 10-12 PSI for the rear tires. Check the sidewall of the tires or the owner's manual for the exact specifications.
Smoke from the engine could indicate oil spillage, overfilled oil levels, or a clogged air filter. Inspect these areas and clean or adjust as necessary. Persistent smoke may require professional servicing.
To improve fuel efficiency, regularly maintain the engine, keep the air filter clean, ensure tires are properly inflated, and avoid overloading the tractor. Operate at recommended speed settings.
To winterize the tractor, clean the exterior, change the oil, add fuel stabilizer to the gas tank, remove the battery and store it in a cool, dry place, and cover the tractor to protect it from the elements.
To adjust the mower deck, park the tractor on a flat surface, measure the height of each side of the deck, and use the adjustment levers to obtain an even cutting height. Refer to the owner's manual for specific instructions.