Toro Wheel Horse 71189 Operator's Manual

To change the oil, first, ensure the tractor is on a level surface. Turn off the engine and allow it to cool. Locate the oil drain plug beneath the engine, place a pan underneath, and remove the plug. Once drained, replace the plug and refill with the recommended oil type.
Use a high-quality SAE 30 motor oil for temperatures above 32°F (0°C). For colder climates, use SAE 5W-30 or 10W-30 to ensure proper lubrication.
Check the battery connections for corrosion and ensure they are tight. Verify that the fuel tank is filled with fresh gasoline. Inspect the spark plug for wear or damage and replace if necessary. Additionally, check the fuse and replace it if it's blown.
The recommended tire pressure is typically 12 PSI for the front tires and 10 PSI for the rear tires. Always check the manufacturer’s manual for exact specifications.
Replace the air filter every 100 hours of operation or annually, whichever comes first. More frequent replacement may be necessary in dusty conditions.
Regularly clean the mower deck to prevent grass build-up. Sharpen or replace blades as needed, and lubricate all moving parts. Check the belt for wear and tension, adjusting or replacing it if necessary.
To adjust the cutting height, locate the height adjustment lever beside the driver’s seat. Move the lever to the desired position, ensuring it is securely locked in place.
Check that the blades are properly balanced and securely fastened. Inspect for damage or warping, and replace if necessary. Also, examine the spindle and bearings for wear.
Ensure regular maintenance, including air filter and spark plug replacements. Use the recommended oil type and maintain proper tire pressure. Avoid idling and use a moderate speed during operation.
Inspect the transmission fluid level and top it off if necessary. Ensure the drive belt is intact and properly tensioned. Check for any obstructions or debris in the linkage and clear them.