Toro Wheel Horse 56185 Operator's Manual

To start the Toro Wheel Horse 56185 mower, ensure the parking brake is engaged, set the throttle to the 'fast' position, turn the ignition key to the 'start' position, and release it once the engine starts.
Use SAE 30 oil for temperatures above 32°F (0°C) and SAE 5W-30 for temperatures below 32°F (0°C) to ensure optimal performance.
Change the oil every 25 operating hours or at least once per mowing season, whichever comes first.
The recommended tire pressure for the Toro Wheel Horse 56185 mower is 12 psi for the front tires and 10 psi for the rear tires.
To adjust the cutting height, locate the height adjustment lever on the mower deck and move it to the desired setting. Ensure both sides are set to the same height for an even cut.
Check the fuel level, ensure the spark plug is connected and clean, verify the air filter is not clogged, and confirm the battery is charged. If issues persist, consult a professional.
To replace the spark plug, disconnect the spark plug wire, remove the old plug with a spark plug wrench, and install a new plug, ensuring it is properly gapped. Reconnect the wire.
Ensure the mower blades are sharp, clean the underside of the deck to remove grass build-up, and maintain the correct tire pressure and cutting height settings.
Before storing, clean the mower thoroughly, change the oil, remove the battery, drain the fuel, and store it in a dry, covered area. Consider using a fuel stabilizer if storage exceeds 30 days.
Check that the tire pressure is even, the mower blades are sharp and balanced, and the deck is level. Adjust the deck height if necessary to ensure an even cut.