Toro Wheel Horse 42-inch 05-42SS02 Operator's Manual
![Toro Wheel Horse 42-inch 05-42SS02 Mower manual cover](/images/qdrZvmYzkGxsVsJMzOkvlmME/thumbs/thumb175x175.webp)
To start the mower, ensure that the parking brake is engaged, the PTO switch is off, and the throttle is set to choke. Turn the ignition key to the start position until the engine starts, then release it back to the run position.
Use SAE 10W-30 oil for the Toro Wheel Horse 42-inch 05-42SS02 mower. Ensure the oil is suitable for your climate and check the owner's manual for specific recommendations.
Sharpen the mower blades after every 25 hours of use. Regular sharpening ensures a clean cut and maintains the health of your lawn.
Check the fuel level, ensure the spark plug is not fouled, verify the air filter is clean, and make sure the battery is fully charged. If problems persist, consult a professional.
The recommended tire pressure for the Toro Wheel Horse 42-inch 05-42SS02 mower is 15 psi for the front tires and 10 psi for the rear tires.
To replace the mower deck belt, first remove the mower deck. Then, release the belt tension and remove the old belt. Install the new belt following the diagram in the manual, re-tension, and reinstall the deck.
Check if the blades are sharp and balanced, ensure the tire pressures are correct, and verify that the deck is level. Adjust the deck height settings if necessary.
After each use, use a garden hose to wash the underside of the mower deck. Ensure the mower is on a flat surface and the engine is off before cleaning.
Perform regular maintenance such as oil changes every 50 hours, air filter checks every 25 hours, and blade sharpening every 25 hours. Refer to the manual for a complete schedule.
To store the mower, clean it thoroughly, drain the fuel or add a stabilizer, change the oil, and remove the battery. Store in a dry, covered area to protect from weather elements.