Toro Wheel Horse 265-6 72047 Operator's Manual

The recommended oil type for the Toro Wheel Horse 265-6 72047 Tractor is SAE 10W-30 for general use.
To change the mower blades, first disconnect the spark plug for safety. Raise the mower deck, use a wrench to remove the blade bolts, and replace the blades. Ensure they are securely fastened before lowering the deck.
If the tractor won't start, check the battery connections, ensure the fuel valve is open, and verify that the spark plug is in good condition. Also, make sure the PTO switch is off and the brake is engaged.
Regular maintenance should be performed every 25 operating hours, including checking the oil, air filter, and tires. A comprehensive check should be done annually or every 100 hours.
To improve cutting performance, ensure the blades are sharp, the deck is level, and the grass is dry. Regularly clean the underside of the deck to prevent grass buildup.
Clean the tractor thoroughly, change the oil, add a fuel stabilizer, and store it in a dry, covered area. Disconnect the battery and inflate the tires to the recommended pressure.
Adjust the cutting height by moving the lever located on the right side of the tractor. This lever controls the mower deck lift system, allowing you to set the desired cutting height.
Ensure the cooling fins are clean, the engine oil is at the proper level, and the air intake screen is clear of debris. Operating in extreme heat may require reducing the workload on the tractor.
To replace the drive belt, first remove the mower deck. Then, disengage the tensioner and slide the belt off the pulleys. Install the new belt following the same path and re-tension it.
Maintain a tire pressure of 12 psi for the front tires and 10 psi for the rear tires for optimal performance and stability.