Toro Wheel Horse 246-H 72081 Operator's Manual
![Toro Wheel Horse 246-H 72081 Tractor manual cover](/images/mGvCtUfugprRkNyGiXAKqBDU/thumbs/thumb175x175.webp)
To change the oil, start by running the engine for a few minutes to warm the oil, then turn off the engine and remove the key. Place a drain pan under the engine, remove the oil drain plug, and let the oil drain completely. Replace the drain plug, remove the oil filter, and install a new one. Finally, refill with the recommended oil type and amount.
First, check the battery connections for corrosion and ensure they are tight. Verify that the fuel tank is not empty and the fuel valve is open. Inspect the spark plug for wear or damage, and replace if necessary. If the tractor still won't start, consult the user manual for further troubleshooting steps or contact a professional.
The air filter should be checked and cleaned every 25 hours of operation or more frequently in dusty conditions. Replace the air filter if it's damaged or excessively dirty.
The recommended tire pressure is typically found in the owner's manual. Generally, the front tires should be inflated to around 12-14 psi and the rear tires to 10-12 psi. Always confirm with your specific manual.
To adjust the mower deck, park the tractor on a flat surface and lower the deck to the desired cutting height. Use the deck leveling adjusters located on each side of the deck. Turn the adjusters clockwise to raise the deck and counterclockwise to lower it. Ensure the deck is level from side to side.
The Toro Wheel Horse 246-H 72081 is designed to run on unleaded gasoline with a minimum octane rating of 87. Avoid using fuel with more than 10% ethanol to prevent engine issues.
Uneven cutting may be caused by an unlevel mower deck, dull blades, or tire pressure issues. Check and adjust the deck leveling, ensure all tires are inflated to the correct pressure, and sharpen or replace mower blades if necessary.
To replace the drive belt, first remove the mower deck for easier access. Release the belt tension by adjusting the tensioner pulley. Slide the belt off the pulleys and remove it. Install the new belt over the pulleys, ensuring it is properly aligned, and adjust the tensioner to apply the correct tension. Reattach the mower deck.
At the start of each season, perform an oil change, check and clean the air filter, inspect and replace the spark plug if necessary, check tire pressure, and ensure all bolts and fasteners are secure. Additionally, lubricate all moving parts and check the battery charge.
To store the tractor for winter, clean it thoroughly to remove grass and debris. Drain the fuel tank or add a fuel stabilizer. Change the oil and oil filter, remove the battery and store it in a cool dry place, and cover the tractor to protect it from dust and moisture.