Toro Wheel Horse 17-44HXLE 71282 Operator's Manual
![Toro Wheel Horse 17-44HXLE 71282 Tractor manual cover](/images/PAVqnVTDHvTjDzprYwWPJPSP/thumbs/thumb175x175.webp)
To change the oil, first ensure the tractor is on a level surface. Turn off the engine and allow it to cool. Locate the oil drain valve beneath the engine. Place an oil pan underneath, open the valve, and let the oil drain completely. Replace the valve and refill with the recommended oil type and quantity.
Check the battery connections to ensure they are tight and free of corrosion. Verify that the fuel tank has fuel and that the fuel shutoff valve is open. Inspect the spark plug for wear and replace if necessary. Also, ensure the PTO is disengaged and the park brake is set.
Uneven cutting can be caused by a misaligned deck. Check that the tire pressures are equal and that the blades are sharp and properly balanced. Adjust the deck level according to the owner's manual.
Regular maintenance includes checking the oil level before each use, changing the oil every 25 hours of operation, cleaning or replacing the air filter every 25 hours, sharpening blades as needed, and inspecting belts for wear regularly.
To adjust the blade belt tension, locate the belt tensioner on the mower deck. Loosen the mounting bolt slightly and adjust the tensioner arm to increase or decrease tension as needed. Tighten the bolt to secure the tensioner once the proper tension is achieved.
Excessive vibration can be caused by unbalanced blades or debris caught in the mower deck. Check that the blades are sharp and properly balanced. Clear any debris from the deck and inspect the belt for wear or damage. Replace any components as necessary.
To replace the spark plug, ensure the engine is cool and disconnect the spark plug wire. Use a spark plug socket to remove the old spark plug. Check the gap on the new spark plug and adjust if necessary. Install the new spark plug and reconnect the wire.
Check the air filter to ensure it is clean and not clogged. Inspect the fuel filter for blockages and replace if necessary. Verify the spark plug is in good condition and properly gapped. Ensure the engine oil level is adequate and the oil is clean.
Clean the tractor thoroughly to remove grass clippings and debris. Change the oil and ensure the fuel system is stabilized. Remove the battery and store it in a cool, dry place. Cover the tractor and store it in a sheltered area away from harsh weather conditions.
Park the tractor on a level surface and turn off the engine. Remove the mower deck according to the owner's manual instructions. Release the belt tensioner and remove the old belt. Install the new belt, ensuring it is routed correctly, then reattach the deck and adjust tension as needed.