Toro Titan ZX 4800 74855 Operator's Manual
![Toro Titan ZX 4800 74855 Mower manual cover](/images/XtkegntivXHKsxTiqbteRSHO/thumbs/thumb175x175.webp)
Ensure the mower is on a flat surface. Engage the parking brake, set the throttle to 'fast', and turn the ignition key to start the engine.
Check the fuel level, ensure the battery is charged, and verify that the parking brake is engaged. Also, make sure the blade control switch is off.
Warm up the engine, then turn it off. Remove the drain plug and allow the old oil to drain completely. Replace the drain plug and refill with new oil according to the specifications in the manual.
Regularly clean the mower deck to prevent grass buildup. Check and sharpen the blades as needed and ensure the deck is level for an even cut.
First, check if the deck is level. Inspect the blades for sharpness and damage. Adjust tire pressure and ensure the mower is operating at the correct speed.
Always wear protective gear, clear the mowing area of debris, avoid mowing on wet grass, and never allow passengers on the mower.
Use the height adjustment lever located on the mower to set the desired cutting height. Consult the manual for specific height settings available.
Check for debris lodged in the blades or deck. Inspect the blades for balance and damage, and ensure all bolts and fasteners are tight.
Locate the air filter housing, remove the cover, and take out the old filter. Insert a new filter, ensuring it fits snugly, and replace the cover securely.
Clean the mower thoroughly, check for worn parts, change the oil, and store the mower in a dry place. Disconnect the battery and stabilize the fuel if the mower will be stored for an extended period.