Toro TimeCutter SW 3200 74670 Setup Instructions
![Toro TimeCutter SW 3200 74670 Mower manual cover](/images/OAILijBIjwyGPbdnNnEnXxVI/thumbs/thumb175x175.webp)
To start the Toro TimeCutter SW 3200, ensure the mower is on a flat surface. Engage the parking brake, make sure the blades are disengaged, and move the throttle to the 'fast' position. Turn the ignition key to start the engine.
To change the oil, run the engine for a few minutes to warm it up, then turn it off. Remove the oil drain plug and let the old oil drain. Replace the plug and add new oil to the engine. Be sure to use oil that meets the manufacturer's specifications.
If the mower is not cutting evenly, check the tire pressure to ensure it's consistent on all tires. Inspect the blades for damage or dullness and sharpen or replace them as necessary. Adjust the deck leveling to ensure it is even.
If the mower won't start, check the fuel level and ensure the fuel valve is open. Inspect the battery connections for corrosion, and clean them if necessary. Verify that the spark plug is in good condition and replace it if needed.
It is recommended to sharpen the mower blades after every 25 hours of use or at least twice during the mowing season. Sharpening frequency may vary depending on the grass type and mowing conditions.
To clean the mower deck, safely lift the mower to access the underside. Use a hose to wash away grass clippings and debris. Avoid using high-pressure washers as they may damage the deck or components.
Before storing the mower for winter, clean the mower thoroughly, change the oil, and top off the fuel tank with a stabilizer. Remove the battery and store it in a cool, dry place. Cover the mower to protect it from dust and debris.
To adjust the cutting height, locate the height adjustment lever on the mower deck. Move the lever to the desired cutting height position. Ensure both sides are set to the same level for an even cut.
Always wear appropriate safety gear such as goggles and ear protection. Ensure that children and pets are at a safe distance. Be cautious when mowing on slopes to prevent tipping. Disengage blades and turn off the engine before making adjustments or clearing blockages.
To replace the air filter, open the air filter cover on the engine. Remove the old filter and clean the surrounding area. Insert a new filter that matches the specifications, and secure the cover back in place.