Toro TC3110 51655 Operator's Manual
![Toro TC3110 51655 Trimmer manual cover](/images/cKhpmgYfvAplNMaEBNFMKcHv/thumbs/thumb175x175.webp)
To start the Toro TC3110 51655 Trimmer, ensure the power switch is in the "off" position. Plug the trimmer into a power source, hold down the lock-off button and squeeze the trigger to start the trimmer.
If the trimmer line does not advance, ensure the spool is correctly installed, and check for tangles or obstructions. Make sure the line is wound tightly and evenly on the spool.
To replace the trimmer line, disconnect the trimmer from the power source, remove the spool cap, take out the old line, and wind a new line onto the spool. Follow the directional arrows on the spool for proper winding.
Regular maintenance includes cleaning the trimmer after each use, inspecting the trimmer line for wear, and checking the power cord for damage. Lubricate any moving parts if necessary.
Check the power connection and ensure the outlet is working. Verify that the trigger is being fully engaged and inspect the power cord for damage. Make sure the spool is not jammed.
Use an extension cord that is rated for outdoor use and has a gauge appropriate for the length of the cord. A 16-gauge cord is suitable for lengths up to 50 feet, and a 14-gauge cord for up to 100 feet.
To adjust the cutting height, loosen the height adjustment knob on the shaft and slide the shaft to the desired position. Tighten the knob to secure the shaft in place.
If the motor overheats, turn off the trimmer and unplug it from the power source. Allow it to cool down before using it again. Check for any blockages or debris around the motor housing.
Yes, the Toro TC3110 51655 Trimmer can be used for edging. Rotate the trimmer head so that the line spins vertically, and guide it along the edge of the lawn for a clean cut.
Clean the trimmer thoroughly and remove any debris. Store it in a dry, cool place away from direct sunlight. It's recommended to hang the trimmer or store it in its original packaging to prevent damage.