Toro Super Recycler 21389 Operator's Manual
![Toro Super Recycler 21389 Mower manual cover](/images/cJYOwgqZpTzmWkKIxzOipVXU/thumbs/thumb175x175.webp)
To start the Toro Super Recycler 21389 Mower, ensure the fuel valve is open, the choke is engaged, and the blade control bar is held against the handle. Then, pull the starter rope firmly.
If the mower does not start, check the fuel levels, spark plug condition, and ensure the air filter is clean. Also, verify that the safety key is inserted properly.
Sharpen the mower blade at least once per mowing season or after every 20-25 hours of use to ensure optimal performance.
Before storing the mower, clean the deck, change the oil, remove fuel from the tank, and ensure the blade is sharp. Store in a dry location.
To adjust the cutting height, use the height adjustment levers located on each wheel. Set them to the desired height position, ensuring all wheels are set equally.
Uncut strips may be due to a dull blade, uneven wheel height settings, or mowing too quickly. Sharpen the blade and check height settings.
Regularly change the air filter, use fresh fuel, clean the spark plug, and ensure the carburetor is free of debris to maintain engine performance.
Use SAE 30 or SAE 10W-30 oil for the Toro Super Recycler 21389 Mower, depending on the climate conditions in your area.
To clean the mower deck, safely tip the mower to one side and use a garden hose to rinse off grass clippings. Avoid water contact with the engine.
Excessive vibration may be caused by an unbalanced blade or loose parts. Check the blade balance and tighten any loose bolts and nuts.