Toro Super Recycler 21-inch 21565 Operator's Manual
![Toro Super Recycler 21-inch 21565 Mower manual cover](/images/AvZvjfkVeolfAHMYjuPDmTrK/thumbs/thumb175x175.webp)
To start the mower, ensure the fuel valve is open, the key is in the ignition, and the blade control lever is engaged. Pull the starter rope firmly to start the engine.
Check the fuel level, ensure the spark plug is connected, and verify the air filter is clean. If the problem persists, inspect the fuel line and carburetor for blockages.
Change the oil after the first 5 hours of use, and then after every 25 hours of operation or at least once per season.
To adjust the cutting height, locate the height adjustment levers on each wheel. Move the levers to the desired position to raise or lower the cutting height evenly.
After use, ensure the engine is off and cool. Use a garden hose to wash away grass clippings and debris from under the deck. Dry thoroughly to prevent rust.
Remove the blade by loosening the central bolt. Secure the blade in a vice and use a file or sharpening stone to hone the edge. Reinstall the blade securely.
Check the blade for damage or imbalance, and ensure it is properly secured. Inspect the engine mounts and wheels for any loose components.
Ensure the blade is sharp and the deck is clean. Mow slowly to prevent clogging. Raise the cutting height and mow more frequently to avoid letting the grass grow too tall.
Drain the fuel, change the oil, and clean the mower thoroughly. Remove the spark plug and add a few drops of oil into the cylinder. Replace the spark plug and turn the engine over a few times.
Disconnect the spark plug wire, remove the blade and belt cover, and then slide off the old belt. Install the new belt around the pulleys, ensuring proper tension, and reassemble the components.