Toro Super Recycler 20493 Operator's Manual
![Toro Super Recycler 20493 Mower manual cover](/images/YxFNQteIaEKFPezRKnKowlsx/thumbs/thumb175x175.webp)
To start the Toro Super Recycler 20493 Mower, ensure the fuel valve is open, engage the safety handle, set the choke if needed, and pull the starter rope firmly.
Check the fuel level, ensure the spark plug is connected, clean or replace the air filter, and ensure the safety handle is engaged.
It is recommended to change the oil after the first 5 hours of use and then every 25 hours of operation or once per mowing season.
Toro recommends using SAE 30 oil for temperatures above 32°F (0°C) and 10W-30 for temperatures below.
Ensure the blade is sharp, adjust the cutting height to match grass conditions, and mow when the grass is dry.
Clean the mower, remove fuel, change the oil, and store it in a dry place. Consider removing the battery if applicable.
Disconnect the spark plug, tilt the mower, use a wrench to remove the blade bolt, and replace with a new blade, ensuring it is properly secured.
Excessive vibration may be caused by a damaged or unbalanced blade. Check the blade for damage and ensure it is properly balanced and secured.
To adjust the cutting height, move the adjustment levers located on each wheel to the desired position. Ensure all wheels are set to the same height.
After mowing, use a garden hose to rinse the underside of the mower deck. For stubborn debris, a putty knife can be used to scrape off grass clippings.