Toro Super Recycler 20465 Operator's Manual
![Toro Super Recycler 20465 Mower manual cover](/images/zCDRNTlDVDDMewHbkbvBCfQd/thumbs/thumb175x175.webp)
To start the Toro Super Recycler 20465 mower, ensure the fuel valve is open, the throttle is set to choke, and the blade control handle is engaged. Then, pull the starter rope firmly.
If the mower does not start, check the fuel level, ensure the spark plug is connected, and verify that the air filter is clean. If problems persist, consult the user manual or contact a service professional.
The mower blade should be sharpened at least once per mowing season or after approximately 25 hours of use to ensure optimal performance.
To replace the air filter, remove the air filter cover, take out the old filter, and insert a new one. Secure the cover back in place. Ensure the filter is compatible with the Toro Super Recycler 20465 model.
Toro recommends using SAE 30 motor oil for temperatures above 40°F (4°C) and SAE 10W-30 for temperatures below 40°F (4°C) for the Super Recycler 20465 mower.
To adjust the cutting height, locate the height adjustment levers on each wheel and move them to the desired position. Ensure all wheels are set to the same height for an even cut.
If the mower is leaking fuel, inspect the fuel lines and tank for cracks or damage. Tighten any loose connections and replace damaged parts. Always perform this maintenance with the engine off and cool.
Uncut grass may be due to a dull blade, incorrect cutting height, or clogged deck. Check and sharpen the blade, adjust the height, and clear any debris from the deck.
To clean the mower deck, turn off the engine and disconnect the spark plug. Use a garden hose to wash away grass clippings and debris, ensuring water does not enter the engine. Dry the deck thoroughly to prevent rust.
Routine maintenance includes checking and changing the oil, cleaning or replacing the air filter, inspecting the spark plug, sharpening the blade, and cleaning the mower deck after each use.