Toro Super Bagger 20194 Operator's Manual
![Toro Super Bagger 20194 Mower manual cover](/images/dLMxiTbSxzlMIRjyXbSFqbHS/thumbs/thumb175x175.webp)
To start the Toro Super Bagger 20194 Mower, ensure the fuel valve is open, the throttle is set to 'fast', and the blade control is disengaged. Pull the starter handle firmly.
To adjust the cutting height, locate the height adjustment levers on each wheel and move them to the desired position, ensuring all four wheels are set to the same height.
Ensure the bag is properly installed and not clogged. Mow when the grass is dry and avoid cutting more than one-third of the grass height at a time.
Check the fuel level, ensure the spark plug wire is connected, and verify that the air filter is clean. If the problem persists, refer to the manual for troubleshooting steps.
Change the oil after the first 5 hours of use, then every 50 hours of operation or annually, whichever comes first.
Use SAE 30 motor oil for temperatures above 40°F (4°C). For temperatures below 40°F (4°C), use SAE 10W-30 oil.
After each use, disconnect the spark plug wire and remove grass clippings from under the deck using a brush or a hose. Ensure the mower is completely dry before storage.
Disconnect the spark plug wire, remove the blade, and sharpen it using a file or a sharpening stone. Make sure to balance the blade before reinstalling.
Check for debris in the blade area and ensure the blade is not bent. Also, make sure all nuts and bolts are secure. Replace damaged parts as necessary.
Drain the fuel tank or add a fuel stabilizer, change the oil, clean the mower thoroughly, and store it in a dry place. Disconnect the battery if applicable.