Toro Super 325 51552 Operator's Manual

To start the Toro Super 325 51552 Blower, ensure the blower is on a flat surface, switch the power button to the 'ON' position, and pull the starter rope with a firm, steady motion.
The blower requires a mixture of unleaded gasoline and 2-cycle oil at a ratio of 50:1. Always use fresh, clean fuel to ensure optimal performance.
Check the fuel level, ensure the spark plug is clean and properly connected, and verify that the air filter is not clogged. Also, make sure the power switch is in the 'ON' position.
Regular maintenance includes cleaning the air filter, checking and replacing the spark plug as needed, and inspecting the fuel system for leaks or damage.
Remove the air filter cover, take out the filter, and wash it with warm soapy water. Rinse thoroughly and allow it to dry completely before reinstalling.
Check for loose or damaged parts, ensure the impeller is not obstructed, and verify that the blower is assembled correctly. Tighten any loose bolts and replace damaged components.
Regularly clean the air filter, use the correct fuel mixture, and perform scheduled maintenance to keep the blower running efficiently.
Wear safety goggles, ear protection, and long clothing to protect against debris. Always operate the blower with both hands and never point it at people or animals.
Drain the fuel tank completely, run the blower until it stops to clear the fuel lines, clean the unit, and store it in a dry, cool place.
Check and clean the air filter, ensure the spark plug is in good condition, and verify that the fuel mixture is correct and fresh.