Toro Revolution 66220T Operator's Manual

To start the Toro Revolution 66220T Trimmer, ensure it is fully charged, then press the power button located on the handle. Hold the handle trigger to activate the trimmer head.
If the line breaks frequently, check for obstructions in the trimming area and ensure that the line is properly installed on the spool. Using the correct line size and type recommended by Toro can also help reduce breakage.
To replace the trimmer line, turn off the trimmer and remove the spool cap. Take out the old line, insert the new line through the holes in the spool, and wind it evenly. Secure the line under the notches and replace the spool cap.
Regular maintenance includes cleaning the trimmer after use, checking the line for wear, charging the battery fully, and inspecting the trimmer head for damage. Periodically check all screws and fasteners for tightness.
If the trimmer does not start, ensure the battery is fully charged and properly connected. Check for any visible damage to the power button or wiring. If the problem persists, consult the user manual or contact Toro customer support.
It is not recommended to use the Toro Revolution 66220T Trimmer in wet conditions as it may affect performance and safety. Always follow the manufacturer's guidelines for safe operation.
To charge the battery, connect it to the provided charger and plug it into a standard electrical outlet. Charge the battery until the charger indicates a full charge, and avoid overcharging to maintain battery health.
To adjust the handle height, locate the adjustment lever on the shaft. Release the lever, adjust the handle to the desired height, and lock the lever back in place to secure it.
Excessive vibration can be caused by an unbalanced trimmer head or damaged line. Inspect the trimmer head for damage and ensure the line is installed evenly. If the issue persists, contact Toro support for further assistance.
Before storing the trimmer, clean it thoroughly and remove the battery. Store the trimmer in a dry, cool place and keep the battery in a temperature-controlled environment to maintain its lifespan.