Toro Recycler FlexForce 55-cm 21863 Operator's Manual

To start the mower, ensure the battery is fully charged and properly installed. Press and hold the safety button on the handle, then pull the bail lever towards the handlebar and release the safety button.
Check that the battery is charged and correctly seated. Ensure the safety button and bail lever are being operated correctly. Inspect for any obstructions in the blade area and clear them if present.
Sharpen the mower blades every 20-25 hours of use or at the beginning of each mowing season to ensure optimal performance.
It is not recommended to mow wet grass as it can lead to uneven cutting and clogging. Wait until the grass is dry for best results.
Remove the battery and use a brush or cloth to remove grass clippings and debris. Avoid using water directly on the mower to prevent damage to the electrical components.
Regularly check and clean the air vents, inspect the blade for damage and sharpness, and ensure the battery and charger are functioning properly.
The cutting height can be adjusted by moving the height adjustment lever located on each wheel to the desired position.
Excessive vibration may be caused by an unbalanced or damaged blade. Inspect the blade for damage or imbalance and replace if necessary.
The battery typically takes about 60 minutes to fully charge when using the standard charger.
Yes, the Toro Recycler is equipped with a mulching feature that allows you to efficiently mulch leaves and grass clippings.