Toro Recycler FlexForce 22-inch 21468 Operator's Manual

To start the mower, ensure the battery is fully charged and properly inserted. Press the safety button and pull back the bail handle to engage the motor.
Check if the battery is fully charged and correctly installed. Ensure the safety key is in place. If the problem persists, consult the user manual for troubleshooting steps.
Regularly inspect the blade for damage and sharpness. Sharpen the blade at least once a season and replace it if it shows signs of significant wear or damage.
After each use, disconnect the battery and use a brush or hose to remove grass clippings and debris from the mower deck. Avoid using strong jets of water to prevent damage.
Ensure the blade is sharp, the deck is clean, and the battery is fully charged. Regularly mow with the correct cutting height for the grass type and conditions.
Charge the battery after each use to ensure it is ready for the next mowing session. Avoid letting the battery completely discharge.
Check the blade for sharpness and damage. Ensure the deck is clean and the cutting height is set appropriately. Mow at a steady pace to ensure even cutting.
Clean the mower thoroughly, remove and store the battery in a cool, dry place, and keep the mower in a dry, sheltered area to prevent rust and damage.
It is not recommended to mow wet grass as it can lead to uneven cutting, clog the mower deck, and increase the risk of slipping. Wait until the grass is dry for best results.
Locate the height adjustment lever near each wheel. Move the lever to the desired position to adjust the cutting height uniformly across all wheels.