Toro Recycler FlexForce 22-inch 20363 Operator's Manual
![Toro Recycler FlexForce 22-inch 20363 Mower manual cover](/images/MevvTUaLFKrDzgYCARnZVQdY/thumbs/thumb175x175.webp)
To start the mower, ensure the battery is fully charged and properly installed. Then, press and hold the safety button while pulling the bail lever toward the handle. Release the safety button to start the mower.
Check if the battery is charged and correctly inserted. Ensure the safety button and bail lever are being operated as per the manual. Inspect for any blockages in the blade area and ensure the safety key is in place.
To adjust the cutting height, move the height adjustment lever located on each wheel to the desired setting. Ensure all wheels are set to the same height for an even cut.
Regularly clean the underside of the mower to prevent grass buildup, check and tighten bolts and screws, and inspect the blade for sharpness and damage. Charge the battery after each use and store it in a cool, dry place.
To improve battery life, charge the battery after each use and avoid letting it fully discharge. Store the battery in a cool, dry environment and ensure the battery contacts are clean.
After use, remove the battery and use a brush or cloth to clean grass clippings from the deck and wheels. Avoid using water directly on electrical components.
Check if the wheels are set to the same height. Inspect the blade for sharpness and balance, and adjust or replace it if necessary. Ensure the mower deck is clean and free of debris.
While the mower can cut damp grass, it is recommended to avoid mowing wet grass to prevent clumping and ensure a clean cut. Wet conditions can also increase the risk of slipping.
Ensure the mower is turned off and the battery is removed. Tilt the mower and use a wrench to remove the blade bolt. Replace the blade with a new one and tighten the bolt securely.
Always wear appropriate protective gear such as gloves and goggles. Ensure the mowing area is clear of debris and bystanders. Follow all safety instructions in the user manual, and never bypass safety features.