Toro Recycler FlexForce 21-inch 21356 Operator's Manual

To start the mower, ensure the battery is charged and properly installed. Insert the safety key, press the start button, and pull back the bail handle.
It is recommended to clean the mower deck after each use, check the blade for sharpness monthly, and ensure the battery is charged before storage. Annual professional servicing is also advised.
Use a hose to rinse off grass clippings and debris from the deck. Avoid using high-pressure water to prevent damage to the motor or blade components.
Ensure the safety key is inserted correctly, the bail handle is pulled back fully, and check for any obstructions in the blade area. If the problem persists, consult the user manual or contact Toro support.
It is recommended to use a sharpening stone or file to manually sharpen the blade, ensuring the angle is maintained. Professional sharpening services can also be used for optimal results.
Adjust the cutting height by using the lever located on each wheel. The mower offers multiple height settings, which can be adjusted according to grass length and condition.
While it is possible to use the mower on damp grass, it is not recommended to mow excessively wet grass as it can clog the deck and affect performance. Wait until the grass is less wet for best results.
Clean the mower thoroughly, remove and store the battery indoors, and keep the mower in a dry, sheltered place. It is advisable to cover the mower or store it in a garage or shed.
Check the battery terminals for corrosion and clean if necessary. Ensure the charger is functioning properly. If issues persist, consider replacing the battery or contacting Toro support for assistance.
First, disconnect the battery and ensure the mower is on a flat surface. Use a wrench to remove the blade bolt, replace the old blade with a new one, and secure it by tightening the bolt. Ensure the blade is correctly balanced.